MD005S or (mb005s) thru md10s or (mb10s) page: 1 + frontier electronics corp. 667 e. cochran street, simi valley, ca 93065 tel: (805) 522-9998 fax: (805) 522-9989 e-mail: frontiersales@frontierusa.com web: http://www.frontierusa.com 0.8a mini surface mount bridge rectifiers MD005S or (mb005s) thru md10s or (mb10s) features z plastic material used carries underwriters laboratory recognition 94v-0 z glass passivated chip z ideal for printed circuit board mechanical data z case: molded plastic, dimensions in inches and (millimeters) z terminals: lead solderable per mil-std-202, method 208 z polarity: polarity symbols marked on body z mounting position: any z weight: 0.22 grams maximum ratings and electrical characteristics ratings at 25 c ambient temperature unless otherwise specified single phase, half wave, 60 hz, resistive or inducti ve load. for capacitive load, derate current by 20% ratings symbol md(b)005s md(b)1s md(b)2s md(b)4s md(b)6s md(b)8s md(b)10s units maximum recurrent peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms voltage v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum average forward output rectified current at ta=40 c i o 0.8 a peak forward surge current single half sine-wave superimposed on rated load i fsm 30 a typical junction capacitance per element (note 1) c j 18 pf storage temperature range t stg - 55 to + 150 operating temperature range t op - 55 to + 150 electrical characteristics (a t t a =25 c unless otherwise noted) characteristics symbol md(b)005s md(b)1s md(b)2s md(b)4s md(b)6s md(b)8s md(b)10s units maximum instantaneous forward voltage drop per element at 0.8a v f 1.0 v maximum reverse current t a =25 at rated dc blocking voltage per element t a =125 i r 5.0 0.5 a ma marking MD005S or mb005s md1s or mb1s md2s or mb2s md4s or mb4s md6s or mb6s md8s or mb8s md10s or mb10s note: 1. measured at 1.0 mhz and applied reverse voltage of 4.0 volts 0.106(2.7) 0.090(2.3) 0.193(4.9) 0.177(4.5) 0.108(2.74) 0.092(2.34) ~ - ~ 0.276(7) max 0.008(0.20) 0.003(0.08) 0.157(4.0) 0.145(3.6) 0.014(0.35) 0.006(0.15) 0.043(1.1) 0.027(0.7)
MD005S or (mb005s) thru md10s or (mb10s) page: 2 rating and characteristics curves md(b)005s thru md(b)10s fig. 2 - maximum non-repetitive peak forward surge current per leg 30 25 20 15 10 5 0 peak forward surge current amperes 1 10 100 number cycles at 60h z fig.3 - typical forward characteristics 10 1.0 0.1 .01 instantaneous forward current, amperes 0.4 0.6 0.8 1.0 1.2 1.4 n stantaneous forward voltage, volts t j =25 typical distributio fig. 4 - typical reverse characteristics 10 1.0 0.1 .01 average forward output current amperes 0 20 40 60 80 100 120 140 percent of rated peak reverse voltage t j =25 fig. 1 - derating curve for output rectified current 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 average forward output current amperes 20 40 60 80 100 120 140 150 ambient temperature,
|